← Back to Interio

How to use

Generate a kitchen

  1. Fill in any of the fields on the left, or none.
  2. Press Generate AI kitchen design. Three designs appear on the right.
  3. Click one to open it in 3D.

Tap a selected option again to clear it. Clear resets the whole brief; Empty room starts with bare walls instead. The dot on Claude at the top shows the connection to Claude.

Move around

TrackpadTouchMouse
OrbitTwo-finger scrollDrag one finger on empty spaceDrag on empty space
ZoomPinchPinchScroll wheel
PanTwo-finger scroll in top viewTwo-finger drag (tablets and larger screens)Drag in top view

Switch between Dollhouse, Top view and Side views at the bottom. Top view reads like a plan: wall cabinets are drawn dashed.

Arrange

Select a moduleClick or tap it
Move itDrag it; it snaps to walls and neighbours
Nudge it← → ↑ ↓ by 5 cm, with Shift by 25 cm
Remove itDelete, or the button under the module
Add a moduleAdd tab: drag a card into the room, or press its +
Move a door or windowDrag it along its wall; the distance to each corner is shown as you go
Change sizes and finishesSelect a module, then use the panel on the left; Finishes sets the whole kitchen
Change the roomEdit room at the bottom right

Type to it

The bar at the bottom of the 3D view takes precise commands. Press / to focus it and ↑ to bring back the last command.

Left and right mean as you face that wall from inside the room. Common phrasings run instantly without AI; anything else goes to Claude when it is connected. Requests outside the kitchen get “Doesn’t look like anything to me.”

Keep and share

Designs save automatically in this browser and appear under Saved at the bottom of the home screen. Summary shows the part list with prices.